FAangband 0.3.6

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • PowerDiver
    replied
    Originally posted by buzzkill
    I'm not sure. Since you home doesn't move until you physically leave town A, I'd say you have a chance. Worst case scenario is you end up in town A and wasted a WoR (and have to walk back to town B to set a recall point). Then again, maybe you'll end up in Nowhere Town.
    I didn't try that, but I mistakenly thought I knew what was going on and stepped out of town, read ?recall to set the recall point, stepped back into town to do some shopping. I thought I would recall from the town to itself. When the recall kicked in, it kicked me out of town. Whether I returned to the space outside town was luck or a given I do not know.

    Leave a comment:


  • Arralen
    replied
    Fighting in Lothlann 42 on rubble, again.
    Looks like the Spirit naga evades an attack byher own ball of darkness spell (or whatever that was)? I have seen some other "n" and "h" cast such spells at me, and they were never actually damaged by those spells when there was nothing to hide behind, so I guess the spirit naga shouldn't need to hide here as well? Looks like the fact that I hit her in that combat round makes a difference, what it shouldn't ?!

    Code:
    You hit the Spirit naga.
    You miss the Spirit naga. <2x>
    The Spirit naga gestures in shadow.
    Darkness surrounds you.
    The Spirit naga ducks behind a boulder!
    You miss the Spirit naga. <3x>
    The Spirit naga gestures in shadow.
    Darkness surrounds you.

    Leave a comment:


  • Arralen
    replied
    Originally posted by Nick
    Originally posted by Pete Mack
    Just spotted a bug looking at the ladder: Weapon of angband shows "+" for stealth, rather than "-".
    Yes, fair enough - although it's more of a lack of feature. Any "-" in the power section is against the player only - since originally the "+"s in that section were just "is affected by", rather than "adds to", and the player had to go and look up the pval. But now I've expanded on the resists, it does look inconsistent.
    Yeah, noticed that in my char dump,too. Figured the "+" thing as well, but maybe those "+" could be replaced by little "*" or "#"? After all, not all "+" in that section would mean some values is actually added, so that would be somewhat inconsistent as well?


    Originally posted by Nick
    Desert is getting a new feature next time - sand dunes - so there will be less rubble. Also, traps in rubble are going to happen at some point. So enjoy it while it lasts.
    Sounds good, looking forward to it.
    Atm, the route through Ered Luin and later Lothlann is just too easy for a dwarf: evasion first, free movement through all the rubble later, what seems to result in a stronger "evasion effect" than evasion itself, because ....

    Originally posted by Psi
    This is partly the reason for the Ghoul scenario above. Basically to be able to attack you the monster has to make a roll for entering the rubble square - if it fails then it misses its turn.
    Seems to be the case here. I wonder, though, why some monsters seem to be affected much more than others by this? (Especially some "z" and "H" seem to have trouble, while several "d" seem to do fine?)

    Originally posted by Pete Mack
    You may have stunned and/or confused the ghoul--shield bashes can do that. They make a big difference--all other things equal, you should always wear the heaviest shield you can carry.
    There was no message 'bout shield bashing / stunning, so I think I'll go with Psi's explanation.
    Btw., you're right, shield bashing is great, I'm only using a small metal shield and get stunned/confused enemies quite often... which really helps at times ;-)

    Leave a comment:


  • PowerDiver
    replied
    Originally posted by Nick
    I think the logical way for me to fix this is that if the player has a recall point in a town that they move to, this point gets changed to their old home town.
    I have suggestions. I hope you are not surprised.

    (1) Why not allow the player to set a recall point at any time, without using the spell?

    (2) When there at most 3 recall points, and you recall, just add the point [if new] without prompting for which to overwrite. When the current location is already a recall point, do nothing and don't ask.

    (3) This "swap home with current location" dynamic seems strange. Instead of a separate home recall point, why not allow any recall to select any recall point? Or at least, when you recall from danger > 0, why not allow any recall point at danger == 0?
    Last edited by PowerDiver; February 25, 2009, 16:33.

    Leave a comment:


  • Psi
    replied
    Originally posted by Nick
    I think the logical way for me to fix this is that if the player has a recall point in a town that they move to, this point gets changed to their old home town.
    That would be very useful! I always set a recall point just outside town when moving as has been suggested earlier.

    Regarding silly display bugs. Angband weapons (and other cursed things) also say that they decrease your stats by a negative amount which is clearly wrong.

    Leave a comment:


  • Nick
    replied
    Originally posted by PowerDiver
    I, as you know, think anything determined from the code except the RNG should be given in online help.
    I don't go quite that far - my criterion is that the player shouldn't have to do stuff where they think "damn, I shouldn't have done that" without having any clues. Or at least when they do, it should be rare and memorable. So I don't think full monster info should be given out beforehand, as fighting something new and having to be prepared for anything requires skill. The game not being perfect, of course, there are occasions where the line is drawn wrong. And I can't see any point in having to learn a spell before you have any idea what it does.

    Leave a comment:


  • Nick
    replied
    Originally posted by PowerDiver
    Curiouser and curiouser. I could not get autoinscription to work on my scrolls of id {25% off} and thought it was a discount bug, but much later when I autoinscribed a rod of trap location, suddenly the scrolls inscribed too.
    Thanks for the info - that will help for fixing it.

    @Donald - I'm just ignoring your post again

    Leave a comment:


  • Nick
    replied
    Originally posted by Pete Mack
    Just spotted a bug looking at the ladder: Weapon of angband shows "+" for stealth, rather than "-".
    Yes, fair enough - although it's more of a lack of feature. Any "-" in the power section is against the player only - since originally the "+"s in that section were just "is affected by", rather than "adds to", and the player had to go and look up the pval. But now I've expanded on the resists, it does look inconsistent.

    Leave a comment:


  • Nick
    replied
    Originally posted by Pete Mack
    Recommendation: recall to town A, set a recall point immediately outside, then return to town B.
    Yes, this looks like the best workaround to me. A workaround is needed, because the home is deemed to be in the new town as soon as you agree to move there - so recalling will just land you back there again, and you will have a recall point in your home town.

    I think the logical way for me to fix this is that if the player has a recall point in a town that they move to, this point gets changed to their old home town.

    Leave a comment:


  • Pete Mack
    replied
    Bug in equipment attributes

    Just spotted a bug looking at the ladder: Weapon of angband shows "+" for stealth, rather than "-".

    Leave a comment:


  • Pete Mack
    replied
    Recommendation: recall to town A, set a recall point immediately outside, then return to town B.

    EDIT:
    Then there's always the save, try it and find out, and if it doesn't work, kill the process. That's the one time I feel save-scumming is at least arguably OK. (I've done it for bugs, anyway, most recently the one where I wasn't sure if I could take off heavy curses with *Remove Curse*. I could, so no scumming was necessary.)

    Leave a comment:


  • buzzkill
    replied
    Originally posted by PowerDiver
    I have a question on recall points. Suppose I am in one town A, with a home in a different town B. I want to move the home to A, but keep a recall point to the town B.

    What happens if I cast recall in A, and then move the home before the recall kicks in?
    I'm not sure. Since you home doesn't move until you physically leave town A, I'd say you have a chance. Worst case scenario is you end up in town A and wasted a WoR (and have to walk back to town B to set a recall point). Then again, maybe you'll end up in Nowhere Town.

    Leave a comment:


  • Donald Jonker
    replied
    Originally posted by PowerDiver
    Curiouser and curiouser. I could not get autoinscription to work on my scrolls of id {25% off} and thought it was a discount bug, but much later when I autoinscribed a rod of trap location, suddenly the scrolls inscribed too.
    Yeah - I posted about that but it got promptly buried.

    The only time (as far as I've found) the autoinscriptions kick in is when you add/modify/delete an autoinscription, and when you do it applies all of them to your inventory. Picking up or buying won't do it.

    Leave a comment:


  • PowerDiver
    replied
    Originally posted by Donald Jonker
    I can't seem to get autoinscriptions to kick in playing on winXP...
    Curiouser and curiouser. I could not get autoinscription to work on my scrolls of id {25% off} and thought it was a discount bug, but much later when I autoinscribed a rod of trap location, suddenly the scrolls inscribed too.

    Leave a comment:


  • PowerDiver
    replied
    I have a question on recall points. Suppose I am in one town A, with a home in a different town B. I want to move the home to A, but keep a recall point to the town B.

    What happens if I cast recall in A, and then move the home before the recall kicks in?

    Leave a comment:

Working...
😀
😂
🥰
😘
🤢
😎
😞
😡
👍
👎
☕