FAangband 0.3.4

[Arralen]

Problem solved .. I hope - needs testing !

Looking through the fonts using Softy (font editor recommended by L.M.).

Only differences I found vs. 0.2.3 is that the new fonts have 96x96 dpi . So I set the 8X13X fon to 96dpi and everything seems fine !

[Nick]

Looking through the fonts using Softy (font editor recommended by L.M.).

Yes, I got this far.

Only differences I found vs. 0.2.3 is that the new fonts have 96x96 dpi . So I set the 8X13X fon to 96dpi and everything seems fine !

But I didn't think of this! Well done - I have given it a quick test in XP and it seems fine, and I suspect also Vista (although I haven't checked thoroughly yet). In any case, I'll do some thorough checking now.

[Nick]

Looking through the fonts using Softy (font editor recommended by L.M.).

Only differences I found vs. 0.2.3 is that the new fonts have 96x96 dpi . So I set the 8X13X fon to 96dpi and everything seems fine !

OK, in fact (as you may have seen in my post on the Vanilla forum), this not only fixes the FA problem for XP, but also the blank walls Vista problem for every variant! You are officially a legend now.

[takkaria]

Looking through the fonts using Softy (font editor recommended by L.M.).

Only differences I found vs. 0.2.3 is that the new fonts have 96x96 dpi . So I set the 8X13X fon to 96dpi and everything seems fine !

Indeed, you are a legend.

[Elrosk]

Mining collapse

Every time my poor Longbeard warrior tries to tunnel into anything other than a permanent rock or empty space, the game crashes. Tunneling into a monster or any type of rock triggers the crash.

Using Windows XP if it matters. Anyone else have the same issue? This is using the most recent version 0.34.

[HallucinationMushroom]

Every time my poor Longbeard warrior tries to tunnel into anything other than a permanent rock or empty space, the game crashes. Tunneling into a monster or any type of rock triggers the crash.

Using Windows XP if it matters. Anyone else have the same issue? This is using the most recent version 0.34.

I also came across this tunneling thing so I just turned on my .34, and have xp as well. I was able to pinpoint something that could be helpful... I noticed that if my numlock was on I could tunnel just fine, but if my numlock was off the game would crash. I also noticed that it didn't matter if my numlock was on or off if I tried tunneling in the town, but once in the wilderness it did.
For what it's worth... ?? I have no idea how these games work.

[Nick]

Every time my poor Longbeard warrior tries to tunnel into anything other than a permanent rock or empty space, the game crashes. Tunneling into a monster or any type of rock triggers the crash.

Using Windows XP if it matters. Anyone else have the same issue? This is using the most recent version 0.34.

As HM says, I think numlock on is the correct workaround; there are unresolved issues with pref files in windows (especially XP, it seems) and turning numlock on permanently when playing seems to fix most of them.

[Elrosk]

As HM says, I think numlock on is the correct workaround; there are unresolved issues with pref files in windows (especially XP, it seems) and turning numlock on permanently when playing seems to fix most of them.

Thanks! That works. Of course, I can't run with numlock on, but at least when I do need to tunnel, I can just hit numlock, then turn it off again. Playing a melee character without the ability to tunnel would have been brutal!

[buzzkill]

Ran into what might be a bug the other day. My Ent-Paladin, normally susceptible to fire (natural -30% resistance), found a 'ring of resist fire' which decreased his resistance to negative 71%. Apperantly it was a ring of resist fire -41%. I was able to 'wield' and 'take off' the ring without incident so I'm assuming it wasn't cursed, although I wasn't able to sell it in town. Can 'rings of resist' operate to the negative as this one did, or is it a bug?

Although a veteran of Rogue (Amiga) and Moria (C64), I'm new to FA and angband in general. The best of my 50 or so characters only achieved level 20, so feel free to educate me.

Playing FAangband 3.4 on Windows Vista (Vista SUCKS).

[Psi]

That is currently a feature rather than a bug (there was a bug that enabled you to sell them previously!). You really have to keep an eye on those 'resist' items!

[Arralen]

"Sorcery and Evocations" messed up ?!

For my Lvl 33 Dark-Elf Mage, it list spells as shown below. IMHO the fail rates for "Frost Ball" and higher spells are way to high - the char is rated up to 11 level higher than those spells ..

[Nick]

For my Lvl 33 Dark-Elf Mage, it list spells as shown below. IMHO the fail rates for "Frost Ball" and higher spells are way to high - the char is rated up to 11 level higher than those spells ..

Yes, Frost Ball and Recharge Item II are both noticeably higher than the other spells in this book; Identify in Incantations and Illusions is similar. I'm not sure why - this is how I inherited it from O. Mage spells are due for an overhaul in 0.4.0, so I'll look into it then.

[AnonymousHero]

Quick question about a pet peeve of mine: Is it possible to turn off the menu that appears if you press <ENTER>?

It drives me nuts when stair-scumming (which, let's face it, you have to do a lot for the "advanced" races) that I frequently get the menu popup. I know it's possible to use other keys to clear messages, but I'm so used to using <ENTER> since it's a "no action, only clears message buffer" key (plus, it works exactly like that for all the variants I've ever tried).

[Zikke]

Quick question about a pet peeve of mine: Is it possible to turn off the menu that appears if you press <ENTER>?

It drives me nuts when stair-scumming (which, let's face it, you have to do a lot for the "advanced" races) that I frequently get the menu popup. I know it's possible to use other keys to clear messages, but I'm so used to using <ENTER> since it's a "no action, only clears message buffer" key (plus, it works exactly like that for all the variants I've ever tried).

I have been wondering the same thing on this variant and the couple others that use this menu. Seems like there could be a settings option to toggle it on/off. I have been hitting ESC for clearing text, but it's inconvenient

[Nick]

I have been wondering the same thing on this variant and the couple others that use this menu. Seems like there could be a settings option to toggle it on/off. I have been hitting ESC for clearing text, but it's inconvenient

Yes, that seems like a good idea.